Field Names and Descriptions
Issue 3 May 2002
5-7
Use this screen as follows:
1. Type the login you want to add to the system.
2. Press to submit the login.
3. The following prompt appears: New password:
Type the password to be associated with the login and press .
Passwords follow normal UNIX
®
naming conventions. These are:
■ Each password must have at least 6 characters.
■ Each password must contain at least two alphabetic characters and
at least 1 numeric or special character. “Alphabetic” includes all
uppercase and lowercase letters.
■ Each password must differ from the user’s login name and any
reverse or circular shift of that login name. (Corresponding
uppercase and lowercase letters are considered equivalent.)
■ A new password must differ from the old one by at least three
characters.
NOTE:
The asai_adm login that the primary administrator uses is not bound
by these conventions when making up passwords.
4. The following prompt appears: Re-enter password:
Re-enter the password at the prompt and press again. If you
entered the password the same way both times, the password is added
and the Login/Password Administration screen reappears. Repeat this
procedure for each login and password you want to add.
ENTER
RETURN
RETURN
To Next Page
Loading...
Need help?
General
