Task 5A, Alternative Procedures
Issue 3 May 2002
3-17
The MAPD system sends packet messages (20 in this example) to the
client, and listens for responses.It displays messages similar to the
following.
Screen 3-9. Results of Pinging the Client
10. Read the next section "Guidelines for Evaluating a Client Network Ping"
and examine the test results that are displayed at the bottom of the screen.
For example.
----(address) PING statistics----
x packets submitted, y packets received. z percent
packet loss
round-trip (ms) min/avg/max =aa/bb/cc
The messages which follow are the result of your last request.
At the <EOF> : prompt press return to continue.
64 bytes from 192.168.25.20: icmp_seq*0, time=0. xx
64 bytes from 192.168.25.20: icmp_seq*1, time=0. xx
64 bytes from 192.168.25.20: icmp_seq*3, time=0. xx
64 bytes from 192.168.25.20: icmp_seq*4, time=0. xx
64 bytes from 192.168.25.20: icmp_seq*5, time=0. xx
64 bytes from 192.168.25.20: icmp_seq*6, time=0. xx
64 bytes from 192.168.25.20: icmp_seq*7, time=0. xx
64 bytes from 192.168.25.20: icmp_seq*8, time=0. xx
64 bytes from 192.168.25.10: icmp_seq*9, time=0. xx
----192.168.25.20 PING statistics----
20 packets submitted, 20 packets received. 0 percent packet loss
round-trip (ms) min/avg/max =0/0/0
<EOF>:
64 bytes from 192.168.25.20: icmp_seq*2, time=0. xx