Aviom A640 - Page 59

Page 53Aviom A640 Personal Mixer User Guide
• Aux Mix settings
• Ambience on/o
• Intercom volume
• Intercom audio source Slot
• LCD Backlight Level
• Mixer Name
• Dante channel names auto-sync on/o setting
• Startup Help on/o at power up setting
Save Conguration
Back Enter
New A640 Cong
DrumSession-02
Rehearsal 6-13
John’s A640
Paul’s A640
George’s A640
Saving a new conguration
To save a conguration:
• Select the Save Conguration option by scrolling with either encoder knob.
• Press the encoder button to activate it.
• When the Save Conguration window opens, a default le name New MixerName Cong
(based on the A640’s current Mixer Name setting) is selected. Any other congurations
previously saved to the USB device are shown in the list.
• Press the enteR soft button on the A640 to start the process.
• Accept the default name or edit the name as needed (scroll with the left encoder; choose a
character with the right encoder).
• Use the cleaR command to reset the current le name. File names can use up to 32
characters and must contain at least one character *.
• Press the SaVe soft button on the A640 to start the le saving process.
• An on-screen progress bar is displayed and a conrmation message follows once the save
process is complete.
• Press any button to exit the Save function and return to the File Transfer menu.
While editing the le name, a second set of 16 characters will become available once a character has
been added to position #16 in the name, indicated by a right triangle. Turn the encoder to access
additional characters for the name.