Page 87Aviom A640 Personal Mixer User Guide
Restore Defaults
To reset the A640 Personal Mixer to the factory default settings, use the Restore Defaults function.
To reset an A640:
• Choose Restore Defaults from the Mixer Setup menu.
• Press either encoder button.
• At the warning message prompt choose YeS to continue or no to cancel.
• After choosing Yes, the default settings are restored.
• Press any button on the A640 to begin mixing again.
Using the Restore Defaults function resets the following:
• Mode: Pro16
• Channel selected: 1
• Last used preset: 1
• Master Treble: centered
• Master Bass: centered
• Master Enhance: 0
• Favorite channel: 1
• Channel settings:
ཌྷ Volume: 0
ཌྷ Mute: O
ཌྷ Pan: centered for mono channels, fully spread for stereo channels
ཌྷ Treble: 0
ཌྷ Bass: 0
ཌྷ EFX: 0
• Ambience: O
• Ambience On Volume: 0
• Group settings: no groups
• Intercom Source: Listen Only
• Aux Out: Main (Mono) Mix
• Aux Mix channels: all O
• Intercom Volume: 0
• Dante Label Auto-sync: O
• Channel Names: Chan 1, Chan 2, etc.
• Mixer Name: A640
• Channel Mapping: identical to Default Mode, plus channel 17 is mapped to Slots 33&34
• Startup Help screen: Enabled
• Last view screen: Channel View
• LCD Backlight Level: Maximum
• All presets are overwritten with default data
About This Mixer
To check the current rmware version of an A640 Personal Mixer:
To Next Page
