723–0018 /02 F7098
Code L80003: “Autodimming: Set maximum illumination power limit for source 'laser'
to 20 %” (Warning)
Situation Solution
An error has caused the Light
Source to be dimmed to its
minimum output
This warning will appear together with other errors. Solve those errors first.
16.4.3 Log files
Creating and downloading log files with PToolset
A diagnostic package can be created with the Projector Toolset, the software tool to set up, manage and
control Barco projectors. The program and all necessary plug-ins, as well as the Reference manual can be
downloaded from my. barco. com. Please refer to the chapter dedicated to the download of the Projector
Toolset in the Installation manual.
Start up the software, go to the service module, then use buttons extract dedicated log file.
Image 16-4
Buttons allow to provide dedicated log files:
• Standard log functionality (Standard Log):
The standard log functionality is the log file that should be attached the service ticket, when a problem is
reported.
The standard download target folder, is the folder that’s pre-selected in the screenshot here below.
It contains the system logs, and the service log (also called “notifications log”).
Note: Windows 10 won't allow the download in this directory, so you can choose the directory when
pressing on the right button.
Troubleshooting
To Next Page
Loading...
Need help?
General
