147
9
Shutting Down
At the end of the day, shut down the cytometer.
BD FACSCanto Clinical Software
1 Create a worklist.
•Enter Clean as the Sample ID.
• Choose a two-tube panel (such as 4 color TBNK) from the panel field
menu.
2 Click .
3 When prompted to save the worklist, click No.
4 (Loader Only) Click to run tubes manually.
Each panel has default acquisition targets. A lab manager should set the
time target (Max time for acquisition) for the two-tube panel to be used for
the Clean to no less than 300 seconds (5 minutes).
To Next Page
Loading...
