Operating instructions CS 300 About the device
6.110.98.5.01.40 en 2 - 5
2
Information on verification (early re-verification)
The verification of a scale is executed according to the respective statutory country regula-
tions. The verification validity period in Germany, for example, is generally 2 years for non-
automatic scales. The verification validity period begins when the scales are put into circu-
lation (installation and commissioning).
A yellow mark of conformity is affixed to the load receptor of the scale,
with the inscription "Gesichert von BIZERBA" (for these scales the valu-
ation of conformity has been carried out by Bizerba). Verifications must
be carried out by the operator of the scale according to the legal re-
quirements.
Verification-related notes for non-EC countries
The statutory regulations of the specific countries must be observed.
To Next Page
Loading...
