Bizerba CS 300 - Page 37

Operating instructions CS 300 Installation
6.110.98.5.01.40 en 4 - 13
4
Load platter holders
Remove load platter holders
4
from the load platter.
Fig. 22: Load platter with holders
Weighing system
The weighing system was preset and verified during manufacture. It is conform with the
verification regulation.
The weighing system CS 300 MA 84 is firstly mounted to the scanner by the POS or scan-
ner supplier and then installed into the POS counter on site.
CAUTION Incorrect use of weighing system!
Damage of weighing system
–
Do not lift the weighing system at the
5
load arms.
5
Load arms
6
Weighing system
Fig. 23: Weighing system