Bizerba CS 300 - Page 45

Operating instructions CS 300 Installation
6.110.98.5.01.40 en 4 - 21
4
Bizerba products are subject to constant further development and various country-specific
regulations.
In order to guarantee that the weighing system is still conform with these regulations after
installation into scanner and complete scanner scale into POS counter, the points descri-
bed in these installation and assembly instructions must be absolutely adhered to.
Pictorial and graphic examples in the installation and assembly instructions may differ from
the supplied version.
Installation into scanner
Fig. 36: Installation of weighing system in
scanner MA 94
Carefully insert weighing system
2
into
scanner
1
.
Screw weighing system to the scanner
using 4 fastening screws
3
.
Do not clamp the connecting cable
4
!