Bosch B4512 Installation Manual

112 en | Keypad Installer menu Control Panels
2018.07 | 16 | F.01U.287.180 Installation Manual Bosch Security Systems, Inc.
* Type (Circle one) Scope (Circle one)
Keypad 7 No keypad / B91x / B92x / B93x / B94x No Device / Area Wide / Acct Wide /
Panel Wide
Keypad 8 No keypad / B91x / B92x / B93x / B94x No Device / Area Wide / Acct Wide /
Panel Wide
*Refer to your control panel for supported number of keypads..
Type
Scope
Area
1. Enter the installer passcode, and then open the [1] Installer Menu.
2. Go to [1] Programming Menu > [5] Keypad.
3. Use /Previous or /Next to go to the desired keypad.
4. Press Edit or Enter to edit the type.
5. Depending on keypad model:
Press the icon or softkey for the desired type.
-or-
Use Previous or Next to go to the desired type.
6. Press Save or Enter. The keypad shows Parameter saved and then asks if you would like
to edit the scope.
7. Press Edit or Enter to edit the type.
8. Depending on keypad model:
Press the icon or softkey for the desired scope.
-or-
Use Previous or Next to go to the desired scope.
9. Press Save or Enter. The keypad shows Parameter saved and then asks if you would like
to edit the area.
10. Press Edit or Enter to edit the type.
11. Depending on keypad model:
Press the icon or softkey for the desired area.
-or-
Use Previous or Next to go to the desired area.
12. Press Save or Enter. The keypad shows Parameter saved.
13. Escape from the menu.
20.1.15 [6] Users menu parameters
In this menu, you can change the Service User passcode and the passcode for User 1.
To add and remove users, change users passcodes, and perform other user functions from the
keypad, you must use the Users menu from the Main menu. Refer to the Control Panels
(B9512G/B8512G/B5512/B4512/B3512) Owner’s Manual for more information.
Users (In the Installer menu)
1. Enter the installer passcode, and then open the [1] Installer Menu.
2. Go to [1] Programming Menu > [6] Users. The keypad shows the Installer passcode.
3. Use /Previous or /Next to toggle between user 000 (service user) and user 001 and
go to the user you want to edit.
4. Press Edit or Enter to edit the selected user. The curser flashes at the editing location.

Bosch B4512 Specifications

General

Control Panel Type	Hybrid
Wired Zones	8
Outputs	2
Programmable Outputs	2
Onboard Ethernet	Yes
Cellular Communication	Optional
Series	B Series
Partitions	2
Type	Control Panel
Model	B4512
Manufacturer	Bosch
Input Voltage	16.5 VAC
Communication Formats	Contact ID, SIA
Power Supply	16.5 VAC
Backup Battery	12 V, 7 Ah
Operating Temperature	0°C to +50°C
Weight	1.5 kg
Compatibility	Bosch accessories