Page 163 of 479
Copy: copy the configuration from one page to another page.
Paste: Paste the copied configuration to the page.
Press Copy key in the source page and press paste key in the destination page.
5.4.1 Name
Enables the User to define the name for each page with a maximum of 18 characters.
Select “Name”, then Press “Enter”, soft key, a keyboard with several keys will appear. Press “Shift” to
select special characters. Press “Caps” to select capital letters. Press soft key “OK” after entering a new
display page name.
5.4.2 Mode
Defines the default mode of displaying data for the page. The available options are Trend, Bar,
Digital, Mix, Circular, Individual and Disable modes.
Note:
Circular Trend mode is available only in PR30.
5.4.3 Speed
This is the display speed. The available display speeds are as below.
1. 100 msec/dot
2. 1 Sec/dot
3. 2 Sec/dot
4. 5 Sec/dot
5. 10 Sec/dot
6. 15 Sec/dot
7. 20 Sec/dot
8. 30 Sec/dot
9. 1 min/dot
10. 2 min/dot
11. 5 min/dot
12. 15 min/dot
13. 10 min/page (Circular Mode only)
14. 30 min/page (Circular Mode only)
15. 1 hour/page (Circular Mode only)
To Next Page
Loading...
Need help?
General
