Brainchild PR10 User Manual

Page 80 of 479
5.1.1.5 Log
5.1.1.5.1 Data Type
The data type for logging is 2 byte.
2 byte range: -32767 to +32767
5.1.1.5.2 Trigger
Two options are available for the user to select.
1. Disable: Select disable while the recording of a specific channel is not required at this time
2. Enable: Select enable while the recording of a specific channel is required at this time
5.1.1.5.3 Method
This is the method of logging measured data. Select the column Method and press Enter. Then
choose the required Log method from the available methods Instant, Average, Minimum or Maximum of
data.
5.1.1.5.3.1 Instant
Logging the last measured data at the logging interval
5.1.1.5.3.2 Average
Logging the averaged of sampled measured data at the logging interval
5.1.1.5.3.3 Minimum
Logging the minimum of sampled measured data at the logging interval
5.1.1.5.3.4 Maximum
Logging the maximum of sampled measured data at the logging interval
5.1.1.5.4 Speed
It is the logging speed (recording speed) of measured data. The available log speeds are as
below.
1. 100 msec/dot
2. 1 Sec/dot
3. 2 Sec/dot
4. 5 Sec/dot
5. 10 Sec/dot
6. 15 Sec/dot
7. 20 Sec/dot
8. 30 Sec/dot
9. 1 min/dot
10. 2 min/dot
11. 5 min/dot
12. 15 min/dot
13. 1 hour/dot
14. 2 hour/dot

Brainchild PR10 Specifications

General

Brand	Brainchild
Model	PR10
Category	Measuring Instruments
Language	English