Name: Brainchild PR10
Brand: Brainchild
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Page 274 of 479

6.2.3.7 PR-DAQ RS485 Communication

The recorder can be connected to real time viewer software using RS232 or RS485 port of

recorder and PC by following the below procedure.

1. Save the PR Configuration to the SD card or USB Disk depends on the selection of External

Storage in Instrument Menu.

2. Press the Save Button on the Configuration page to Save the PR Configuration to the SD card or

USB Disk

3. Remove SD card or USB Disk from PR

4. Connect the SD Card or USB Disk to PC.

5. Open Real time Viewer in DAQ Software

6. Set the Bank and PR Communication Parameter properly for RS485 Communication.

Questions and Answers:

Need help?

Do you have a question about the Brainchild PR10 and is the answer not in the manual?

Brainchild PR10 Specifications

General