Page 165 of 479
5-17 Circular Scale
5.4.8 Pen
This will configure the display pens of that display page and their properties.
5.4.8.1 Channel
Selects a specific channel for that pen from analog input, Math, Counter, Totalizer, External
Channels. Select disable if a specific pen is not required to display any channels.
5.4.8.2 Color
Selects the colour for that pen.
5.4.8.3 Width
Selects the width of that pen. The available options are 1, 2, and 3.
5.4.8.4 Range Low
Defines the low scale for that pen on the display.
5.4.8.5 Range High
Defines the high scale for that pen on the display.
5.4.8.6 Reference points
This will draw two reference points on the display. This will be displayed only in individual mode,
in trend mode with only one pen per page and in circular mode with only one pen per page. The reference
points has two points 1&2 to configure when it is enabled. It will not be displayed when it is disabled.
To Next Page
Loading...
Need help?
General
