Page 207 of 479
5.15 Calibrate
This function is used for calibrating Individual Analog channel. This can be protected by
password. . After entering the Configuration menu, select Calibrate then Press the Enter key to get into
Calibration menu. Press directional keys on the right hand side to select the menu
column. After completing Configuration, press soft key, then press soft key to
return to main display. All configurations will be saved automatically.
The Calibration must be carried out by a qualified personnel only with proper instruments. The
system will show the warning message as shown below when the user is accessing the calibration menu.
After Entering the calibration menu the screen shows the below screen.
Type: Channel is shown as Type always
To Next Page
Loading...
Need help?
General
