Page 365 of 479
Properties
Back Color: Define back color for the component.
Liquid color: Shows temperature level (mercury) in Thermometer.
Tank Color: Define background color of thermometer without mercury.
LabelsPosition: Define Label position. Available options include Top Left, Bottom Right, Both,
Internal and None. The naming convention is based on the selected
orientation of the component.
Orientation: Horizontal/Vertical. This is orientation of component. In the figure above, it is in the
Horizontal direction.
Indent: It is the gap between border and start of scale.
Text Font: It is to set font for the label including the Name of Font, Size of font and Style of font.
Supported styles include Regular, Bold, Italic, Underline & Strikeout.
Bevel: It is to set the border, including the inner border, outer border and style of border.
Inner Border: True/False
Outer Border: True/False
Style: 9 styles are available
None, Flat, Single, Double, Raised, Lowered, Double Raised, Double lowered, Frame
Raised, and Frame Lowered.
Tag Binding: Select the Analog Tag of process value.
Ticks Position: Define ticks position. Available options include Top Left, Bottom Right, Both,
Internal and None.
Ticks Length: Set Tick length in pixels
Scale divisions: Define number of scale divisions (Big Ticks) for the component.
Scale Sub Divisions: Define number of Sub divisions between the above scale divisions
(Number of Small ticks between any two Big Ticks).
Scale Label Divisions: Define number of Labels to be displayed for component as per Scale
Range of process value. For ex: 0, 10, 20, 30…100.
Scale Width: Define Scale width. If you have ticks on both sides of the component, it defines the
width between Upper (Left) & Lower(Right) scale divisions based on orientation of
component.
Bar Width: Define width of Bar in pixels.
To Next Page
Loading...
Need help?
General
