CAI 700M - Page 109

700M HFID 6-2-15
109
The following output signals can be programmed by the operator using the Output
Assignments screen:
RealTime: In either THC or CH
4
mode the concentration’s output will be a live reading.
CH
4
: In CH
4
mode the output concentration will be a live reading. In THC/CH
4
/NMHC mode
the output will be a read and hold.
THC: In THC mode the concentration’s output will be a live reading. In THC/CH
4
/NMHC mode
the output will be a read and hold.
NMHC: The calculated concentration’s output will be updated after each complete cycle in
THC/CH
4
/NMHC mode.
SamplePres: Sample pressure (psig).
AirPres: Air pressure (psig).
FuelPres: Fuel Pressure.
AirInjPres: Air Inject Pressure.
FuelInjPres: Fuel Inject Pressure.
FilterTemp: Filter temperature (°C).
BurnerTemp: Burner temperature (°C).
OvenTemp: Oven temperature (°C).
CutterTemp: Cutter temperature (°C).
PumpTemp: Internal pump temperature (°C).
SampleEPC: % of voltage supplied to the Sample electronic proportioning control valve.
AirEPC: % of voltage supplied to the Air electronic proportioning control valve.
FuelEPC: % of voltage supplied to the Fuel electronic proportioning control valve.
AirInjEPC: % of voltage supplied to the Air inject electronic proportioning control valve.
FuelInjEPC: % of voltage supplied to the Fuel inject electronic proportioning control valve.