CAI 700M - Thc;Ch

700M HFID 6-2-15
54
Manual Calibration
THC/CH
4
/NMHC Mode
→ → →
or
→
When performing a calibration in Switching mode (THC/CH
4
/NMHC mode), the operator
has the option of using basic calibration in THC mode or advanced calibration to create
CH
4
Correction Factors using THC and CH
4
modes. When in Switching mode, the Manual
Calibration menu can be accessed by pressing from the Calibration menu.
Press to access the Manual Zero Calibration screen. For details on zero calibration see
Manual Calibration THC or CH
4
Mode.
Press to access the Manual Span Calibration screen. For details on span calibration see
Manual Calibration THC or CH
4
Mode.
Press to access the CH
4
Correction Factors menu. For details on advanced calibration see
CH
4
Correction Factors.