CAI 700M - Data Logging Time

700M HFID 6-2-15
122
Data Logging Time
→ → →
Data logging allows the analyzer to store internal variables to support CAI
troubleshooting. When troubleshooting with CAI Technical Support, the operator may be asked
to turn this feature on. These files can only be accessed by CAI. To access the Data Logging
screen, press from the Setup menu.
To turn Data Logging on press to open the field, then change the Logging Interval from 0
to the desired time (in seconds). After making your change, press again to close the field.
Press to save your change and return to the Setup menu.
To turn Data Logging off, change the interval to 0 and press to save.