700M HFID 6-2-15
85
Range Setup
→ →
Range Setup allows the operator to change Range Limits, turn Auto Range On or Off, and
change Auto Range Switch Points. From the Menus screen press to access the Range
Setup menu.
Press to view or change Range Limits.
Press to access the Auto Range On/Off menu. In either case, you will return to the Range
Setup menu. The Range Setup menu shows the current status on the right side of the screen after
the ellipsis (…). Example: Auto Range On/Off. . . Off.
Press to view or change Auto Range Switch Points.
To Next Page
Loading...
