700M HFID 6-2-15
110
Output Scaling
→
→
→
→
→
The Output Scaling screen allows the operator to scale the analyzer’s Analog
Outputs to a specific value for each of the four output signals. This is generally used
for scaling of temperatures or pressures, but it can also be used to set an output for a
specific concentration. From the Programmable Analogs menu press to access the
Output Scaling screen.
Use the Up/Down arrows to highlight the field you intend to change. Press
to open the field to change the value. After making your change, press again
to close the field. Press to save your changes and return to the Programmable
Analogs menu.
NOTES:
• Analog Output 1 is indicated as AO-1 in the Output column.
• 0 to 10 VDC output is used for the following three examples:
To Next Page
Loading...
