700M HFID 6-2-15
130
Alarm Limits
→
→
→
The Alarm Limits menu allows the operator to view or change the current upper and lower
alarm tolerances. When the signals go above or lower than the assigned limit an alarm is
triggered. To access the Alarm Limits menu, press from the Alarms menu.
Press to access the Temperatures screen. It allows the operator to set the upper and lower
temperature alarm limits.
Press to access the Pressures screen. It allows operator to set the upper and lower alarm
limits for sample and air pressure.
Press to access the EPC % screen. It allows the operator to view or change the existing
alarm limits of EPC voltage being supplied to the EPC valve.
Press to access the Concentration Alarms screen. It allows the operator to view or change
the upper and lower gas concentration alarm limits.
To Next Page
Loading...
