700M HFID 6-2-15
135
Alarm Display On/Off
→
→
→
The Alarm Display On/Off menu allows the operator to turn On or Off the Alarm Display
that scrolls across the bottom of the Measure screen. Programmed digital output alarms will
not be affected by this setting; only the display will be turned off. The scrolling alarms will be
replaced with the CAI phone number when an alarm is active. If there are no alarms, only the
date and time will be displayed.
Press from the Alarms Menu to access this menu. The current setting is shown in the upper-
right corner of the Alarm Display menu. (In the above example, On.)
From the Alarm Display On/Off menu:
Press to turn the Alarm Display On.
Press to turn the Alarm Display Off.
To Next Page
Loading...
