700M HFID 6-2-15
46
Calibration
→
→
The 700M HFID Analyzer requires initial calibration with zero and span calibration
standards before operation. These calibrations can be performed manually or initiated
automatically. From the Menus screen press to access the Calibration menu. The
Calibration menu includes important features including basic setup for both manual and
automated calibration.
Preparing the Analyzer for Calibration
NOTE: If you are changing the analyzer’s factory settings, Calibration Setup must be
completed prior to your initial calibrations.
From the Calibration menu press to access the Calibration Setup, or you can use this menu
path to access the Calibration Setup menu:
→ → →
. If you are not
making changes to the factory settings, proceed to Manual Calibration.
To Next Page
Loading...
