700M HFID 6-2-15
38
Measure Mode
→
or
→
The Measure Mode menu is used to select one of three measurement modes: THC, CH
4
or
THC/CH
4
/NMHC. The Measure Mode menu is accessed by pressing the key on the Main
Menu. This menu will affect how the analyzer operates and what is displayed in the Measure
screen.
Press to set the analyzer in THC only mode. (Total Hydrocarbons)
Press to set the analyzer in CH
4
only mode. (Methane)
Press to set the analyzer in THC/CH
4
/NMHC mode.
To Next Page
Loading...
