700M HFID 6-2-15
25
From any screen, the Meas key takes you to the Measure screen. The current measurement
is being displayed.
The Enter key:
1. In Function mode, the Enter key selects the highlighted function.
2. When a field is highlighted for numeric input, pressing the Enter key opens the selected
field for numeric entry with a blinking cursor. Pressing the Enter key a second time exits
the Numeric Entry field.
An N will be displayed in the bottom-right corner of the screen when the analyzer is in Numeric
Entry mode. An F is displayed when the analyzer is being used for Function mode.
In Function mode, the arrow keys move the highlight. Press the Enter key
to accept the highlighted function. In Numeric mode these keys control the cursor. Arrow key
functions will vary as is shown on some screens.
In Numeric mode, the left and right arrow keys allow you to move the blinking
cursor.
The up and down arrow keys change the value within a field that has the cursor
underneath it. The arrow keys are also used to scroll the input possibilities and edit the numbers.
To Next Page
Loading...
