700M HFID 6-2-15
63
After all the changes have been made, you must choose one of the following: (Hourly),
(Daily) or (Weekly) to save your changes. If this is not done, the selected changes
will not be made and the analyzer will revert to the previous settings.
To change Timed Auto Calibration to on or off, press (Timed Cal On/Off). A submenu will
open with two choices. Press to turn Timed Cal On, or press to turn Timed Cal Off.
Selecting or will bring you back to the AutoCal Schedule screen. The current setting
is shown on the right side of the menu after the ellipsis (. . .). In the example, Timed Cal On/Off
. . . Off.
To Next Page
Loading...
