Canmax CM-2D202 - Page 207

207
8. SERIAL PROG COMMANDS
Selection
Setting
* Indicates default
Serial Command
# Indicates a
numeric entry
Page
Code 39 Check Character. *No Check Character.
C39CK20 110
Validate, but not to Transmit C39CK21 110
Validate, and Transmit C39CK22 110
Code 39 Message Length Minimum (0 - 48) *0
C39MIN## 111
Maximum (0 - 48) *48 C39MAX## 111
Code 39 Append *Off
C39APP0 111
On C39APP1 111
Code 32 Pharmaceutical
(PARAF)
*Off C39B320 112
On
C39B321 112
Code 39 Full ASCII * Full ASCII Off C39ASC0 113
Full ASCII On C39ASC1 113
Code 39 Code Page Code 39 Code Page
C39DCP## 113
Interleaved 2 of 5 Default All Interleaved 2 of 5
Settings
I25DFT 114
Off I25ENA0 114
*On
I25ENA1 114
Interleaved 2 of 5 Check Digit
*No Check Character.
I25CK20 115
Validate, but not to Transmit I25CK21 115
Validate, and Transmit I25CK22 115
Interleaved 2 of 5 Message
Length
Minimum (2 - 80) *4
I25MIN## 115
Maximum (2 - 80) *80 I25MAX## 115
NEC 2 of 5 Default All NEC 2 of 5 Settings N25DFT 116
Off
N25ENA0 116
*On N25ENA1 116
NEC 2 of 5 Check Digit *No Check Character. N25CK20 117
Validate, but not to Transmit
N25CK21 117
Validate, and Transmit N25CK22 117