Pausing Printing
Pausing Printing
Pausing Printing
During printing, if you set Pause Print in the Control Panel menu to On , printing is stopped at that point and the
printer enters a state in which printing is paused. ( → P .26)
Printing from the job queue is not possible in this state.
T o restore normal operation after this state, set Pause Print to Off .
Note
• In the following cases, the status is cleared even if you do not set Pause Print to Off , and printing
from the job queue resumes.
• When paper is advanced
• When you execute Chg. Paper T ype in the Paper Menu
1. During printing, on the T ab Selection screen of the Control Panel , press ◄ or ► to select the
Job tab ( ).
Note
• If the T ab Selection screen is not displayed, press the Menu button.
2. Press the OK button.
The Job Menu is displayed.
3. Press ▲ or ▼ to select Pause Print , and then press the OK button.
4. Press ▲ or ▼ to select On or Off , and then press the OK button.
Basic Printing W orkow 95
To Next Page
Loading...
