Canon iPF650 - imagePROGRAF Color Inkjet Printer - Printing Performance

Printer Specications
Printing performance
Print method Bubblejet
Maximum resolution 2400 dpi horizontally ( *1 ) × 1200 dpi vertically
Printhead PF-04
Number of nozzles MBK: 5,120; others: 2,560 per color
*1: Prints with a minimum 1/2400 inch dot pitch between ink droplets.
Interface
Format Internal port
Mode Full-speed (12 Mbps), high-speed (480 Mbps), bulk transfer
USB 2.0 ( *1 )
Connector Series B (4-pin)
Format Internal port
Specication IEEE 802.3 10Base-T , IEEE 802.3u
100Base-TX/Auto-Negotiation, IEEE
802.3ab1000Base-T/Auto-Negotiation, IEEE 802.3x
Full Duplex
Ethernet
Protocols IPX/SPX (Netware 4.2, 5.1, 6.0), SNMP , TCP/IP(IPv4/IPv6),
AppleT alk, HTTP
*1: Use in USB 2.0 High Speed mode requires the following environment:
• Computer: USB 2.0 High-Speed-compatible
• Operating system: Windows V ista/Windows Server 2008/Windows Server 2003/Windows
XP/ Windows 2000 or Mac OS X ver . 10.3.9 or later
• USB 2.0 driver: Microsoft USB 2.0 driver (available from Windows Update or the Service Pack.)
• USB cable: Certied USB 2.0 cable
Ink
MBK Ink T ank ( Matte Black Ink , or black
ink for matte paper)
Pigment ink PFI-102MBK
BK Ink T ank ( Black Ink ) Dye ink PFI-102BK
C Ink T ank ( Cyan Ink ) Dye ink PFI-102C
M Ink T ank ( Magenta Ink ) Dye ink PFI-104M
Ink T ank
Y Ink T ank ( Y ellow Ink ) Dye ink PFI-102Y
Capacity 130 ml (4.4  oz)
per color ( *1 )
*1: The provided Starter Ink T anks contain 90 ml (3.0  oz) each.
Printer Parts 73