Output Stacker
Note regarding the Extended position
The Output Stacker can be used in the regular position and an Extended position for easy removal of printed
documents.
For information on types of paper you can use with the stacker in Extended position , refer to the Paper
Reference Guide . ( → P .96)
Regular position Extended position
Switch the stacker to Extended position as follows.
1. Lift the Support Rod to the position shown (a) and switch the stacker to Extended position .
2. When using rolls larger than A1 or 24 inches wide, pull out the Adjustable Stopper .
Handling Paper 151
To Next Page
Loading...
