Canon iPF650 - imagePROGRAF Color Inkjet Printer - Messages Regarding Ink; No Ink Left; Remaining Level of the Ink Cannot be Correctly Detected; Unable to Detect Ink Level Correctly

Messages regarding ink
Messages regarding ink
Ink insufcient.
Cause Corrective Action
Press ▲ or ▼ to select Rep. Ink T ank , and then
press the OK button. Replace the Ink T ank that is
low with a new Ink T ank .
( → P .623)
The ink level is low , so you cannot print, clean the
Printhead , or do other operations that require ink.
Press ▲ or ▼ to select Continue to print , and then
press the OK button to resume printing. However ,
note that this error may af fect the printing quality .
No ink left.
Cause Corrective Action
There is no ink left. Open the Ink T ank Cover and replace the Ink T ank
for which the Ink Lamp is ashing.
( → P .623)
Remaining level of the ink cannot be correctly detected.
Cause Corrective Action
Ink level detection cannot work correctly if you use
rell ink tanks.
The rell ink tank can no longer be used. See the
section “Ink level detection” and take the appropriate
action. ( → P .687)
Unable to detect ink level correctly .
Cause Corrective Action
The remaining ink level could not be correctly
detected.
Close the Ink T ank Cover .
The buzzer will stop once the error is cleared.
Close Ink T ank Cover
Cause Corrective Action
The Ink T ank Cover is open. Close the Ink T ank Cover .
The buzzer will stop once the error is cleared.
Error Message 703