Messages regarding printheads
No printhead
Cause Corrective Action
No Printhead is installed. Install the Printhead .
( → P .633)
Execute printhead cleaning.
Cause Corrective Action
Follow these steps to clean the Printhead .
1. Stop printing by pressing ▲ or ▼ to select Stop
Printing .
2. Clean the Printhead .
( → P .632)
If this message is still displayed, replace the
Printhead .
( → P .633)
Press ▲ or ▼ to select Print , and then press the OK
button to resume printing. However , note that this
error may af fect the printing quality .
The Printhead nozzles are clogged.
If OK is shown on the Display Screen , clean the
Printhead .
1. Press the OK button on the Control Panel to stop
printing.
2. Clean the Printhead .
( → P .632)
If this message is still displayed, replace the
Printhead .
( → P .633)
708 Error Message
To Next Page
Loading...
