Frequently Asked Questions
T roubleshooting
Frequently Asked Questions
Frequently Asked Questions
This section presents frequently asked questions and answers. T o view more detailed explanations, click the
hyperlinks in the answer column.
Question
Answer
How do I print on a roll? When printing on rolls, after loading the roll, specify the paper type and
length, both on the Control Panel and in the printer driver .
Þ " Loading and Printing on Rolls (→P .79) "
How do I print on a sheet? When printing on sheets, specify the paper type and size in the printer
driver before loading the paper .
Þ " Loading and Printing on Sheets (→P .82) "
How do I switch between
printing on rolls and sheets?
When you complete operations on the Control Panel to load or replace
paper , the paper source is automatically switched to the selected paper .
Þ " Loading Rolls in the Printer (→P .106) "
Þ " Loading Sheets in the Printer (→P .136) "
How do I change the paper
type or size?
Specify the type and size of paper , both on the Control Panel and in the
printer driver .
• Specifying it in the printer driver
Þ " Specifying Paper in the Printer Driver (→P .197) "
• Specifying it on the Control Panel
Selecting the paper type
Þ " Changing the T ype of Paper (→P .1 10) "
Selecting the paper size
Þ " Specifying the Paper Length (→P .1 12) "
How do I cut the roll paper after
printing?
Y ou can wait until ink dries before cutting the roll, and you can cut rolls
at a desired position.
Þ " Specifying the Cutting Method for Rolls (→P .129) "
How do I print without borders? Borderless printing is possible on rolls. Y ou can also specify borderless
printing in the printer driver by adjusting the original size to match the
paper size.
Borderless printing is not supported on sheets.
Þ " Borderless Printing on Paper of Equivalent Size (→P .232) "
Þ " Borderless Printing by Resizing Originals to Fit the Roll Width (→P .239) "
Þ " Borderless Printing at Actual Size (→P .225) "
How do I print an A4 original
enlarged on A2 paper?
In the printer driver , you can adjust the original image to match the paper
size or width, or you can specify enlargement or reduction before printing
as desired.
Þ " Resizing Originals to Match the Paper Size (→P .201) "
Þ " Resizing Originals to Fit the Roll Width (→P .207) "
Þ " Resizing Originals by Entering a Scaling V alue (→P .213) "
T roubleshooting 655
To Next Page
Loading...
Need help?
General
