Network Setting
When using an IPv6 IP address
1. Start the web browser and enter the following URL in the Location (or Address ) box to display
the RemoteUI page.
http:// “printer IP address or name” /
Example: http://xxx.xxx.xxx.xxx/
2. Select Administrator Mode and click Logon .
3. If a password has been set on the printer , enter the password.
4. Click Network in the Device Manager menu at left to display the Network page.
5. Click Edit in the upper-right corner of the TCP/IPv6 group to display the Edit TCP/IP Protocol
Settings page.
6. Refer to the TCP/IP Settings Items table to complete the settings.
TCP/IP Settings Items
Item Details
Default Setting
Use IPv6 Activate to enable IPv6. Of f
Use a stateful address Activate when using a DHCP server to
acquire the IP address.
Of f
Use a stateless address Activate when using an IPv6-compatible
router to acquire the IP address.
On
Use a manual address Activate when conguring the IP
address manually .
Of f
IP Address Enter the printer ’ s IP address. blank
Prex Length Enter the IP address prex length. blank
Default Router
Address
Enter the default router address. blank
Prex Length Enter the prex length of the default
router address.
blank
Primary DNS Server Address Specify the IP address of the primary
DNS server .
blank
Secondary DNS Server Address Specify the IP address of the secondary
DNS server .
blank
Use the same host name and
domain name as IPv4
Activate when using the same DNS host
and domain names as for IPv4.
Of f
DNS Host Name Specify the printer host name, up to
63 characters (1-4 characters). Use
single-byte letters, numbers, and “-”
(hyphens). Do not use numbers or “-”
for the rst character or “-” for the last
character .
NB-18GBip6xxxxxx
DNS Domain
Name
Specify the printer domain name, up
to 63 characters. Use single-byte
letters, numbers, “-” (hyphens), and “.”
(periods). Do not use numbers, “-” , or
“.” for the rst character , or “-” or “.” for
the last character .
blank
572 Network Setting
To Next Page
Loading...
Need help?
General
