Printer Driver
C Enlarged/Reduced Printing
Choose from the following options when this setting is activated.
• Resizing Originals to Match the Paper Size (→P .201)
• Resizing Originals to Fit the Roll Width (→P .207)
• Resizing Originals by Entering a Scaling V alue (→P .213)
D Fit Paper Size
Scales the document image to match the paper size.
E Fit Roll Paper W idth
Scales the document image to match the roll width.
F Scaling
Resizes the document image based on a specied scaling value. Enter a value in a range of “5-600.”
G Paper Size
Choose the size of the paper you will print on.
For details on available paper sizes, see “Paper Sizes”. (→P .101)
H Orientation
Choose the printing orientation.
• Making the Original Orientation Match the Paper Orientation (→P .321)
K Rotate Page 90 degrees (Conserve Paper)
Activate this setting to rotate the document image by 90 degrees before printing.
• Conserving Roll Paper by Rotating Originals 90 Degrees (→P .301)
L Paper Source
Choose the feed source, as desired.
Options displayed in the list vary depending on the selection in Media T ype on the Main sheet.
M Roll Paper W idth
Choose the roll width.
For details on available roll widths, see “Paper Sizes”. (→P .101)
N Roll Paper Options
Complete optional roll paper settings. Click to display the Roll Paper Options dialog box.
Under A Automatic Cutting , you can specify Y es or No and Print Cut Guideline .
• Cutting Roll Paper After Printing (→P .331)
Select B Banner Printing when printing multiple pages continuously .
• Printing Multiple Pages Continuously (→P .275)
Windows Software 365
To Next Page
Loading...
