Handling rolls
Loading Rolls in the Printer
Follow these steps to load rolls in the printer .
Note
• Before loading rolls, make sure the printer is clean inside the T op Cover and around the Ejection Guide .
If these areas are dirty , we recommend cleaning them in advance. ( → P .647)
1. Press the Load button.
2. Press ▲ or ▼ to select Load Roll Paper , and then press the OK button.
Note
• If any paper has been advanced that will not be used, a message is shown requesting you to
remove it.
Press ▲ or ▼ to select Y es , and then press the OK button. Remove the paper and go to the
next step.
3. Positioning your hands as shown, open the Roll Cover .
106 Handling Paper
To Next Page
Loading...
