Canon iPF650 - imagePROGRAF Color Inkjet Printer - Printing on Non-Standard Paper Sizes (Mac os X)

Printing banners or at other non-standard sizes
Printing on Non-Standard Paper Sizes (Mac OS X)
This section describes how to register and print Custom Page Sizes based on the following example. Here, you
will register a non-standard paper size named “430*430” in Custom Page Sizes .
• Document: Any T ype
• Page Size: A square sheet (430 × 430 mm [16.9 × 16.9 in])
• Paper: Sheets
• Media T ype: Any type
• Paper Size: A square sheet (430 × 430 mm [16.9 × 16.9 in])
Note
• The following procedures are based on Mac OS X 10.4. The method of setting up non-standard paper
sizes varies depending on the version of Mac OS X.
1. Create the document in the application.
2. Load the square paper (430 × 430 mm [16.9 × 16.9 in]) in the printer .
3. This sets the B Format for and C Paper Size .
Note
• The conguration method varies depending on the OS and application software you are using.
If Page Setup is displayed in the application menu, the settings are congured by opening the
Page Attributes dialog box from Page Setup .
If it is not displayed, the settings are congured in the upper part of the printer driver displayed when
you select Print from the application software menu.
4. Select the printer in the A Printer list.
266 Enhanced Printing Options