Control Panel
Printing Interface Setting Reports
Y ou can print an Interface Print report indicating the current interface settings values of the printer .
Interface Print reports indicate settings values for TCP/IP , NetW are, and other settings.
Printing Interface Print reports
1. Load the paper .
If using sheets, load paper A4/Letter-sized, you will need at least three sheets.
2. On the T ab Selection screen of the Control Panel , press ◄ or ► to select the Settings/Adj.
tab ( ).
Note
• If the T ab Selection screen is not displayed, press the Menu button.
3. Press the OK button.
The Set./Adj. Menu is displayed.
4. Press ▲ or ▼ to select T est Print , and then press the OK button.
5. Press ▲ or ▼ to select Interface Print , and then press the OK button.
Conrming Interface Print information
The following information is included in the Interface Print report.
Canon imagePROGRAF iPFxxxx Interface Print Printer model
Firm Firmware V ersion
Boot Boot ROM V ersion
MIT(DBF) MIT Database Format V ersion
MIT(DB) MIT Database V ersion
S/N Printer serial number
Date The date when the interface setup print report was
printed.
Printer Parts 65
To Next Page
Loading...
