Network Setting
Specifying Printer-Related Information
Specify device information, security , and email notication settings as follows.
1. Start the web browser and enter the following URL in the Location (or Address ) box to display
the RemoteUI page.
http:// “printer IP address or name” /
Example: http://xxx.xxx.xxx.xxx/
2. Select Administrator Mode and click Logon .
3. If a password has been set on the printer , enter the password.
4. Click Information in the Device Manager menu at left to display the Information page.
5. T o display the relevant settings page, click Edit in the upper-right corner of Device Information
or Security , depending on what information you want to specify .
T o change the administrator password, click the Change Password button in the Security group.
6. Refer to the table of settings for device information, security , and email notication as you
complete these settings.
Security setting items are displayed when you click the Change Password button in the
Security group.
Device Information Settings
Item Details
Default Setting
Device Name Enter a device name.
(0-32 characters)
blank
Location Enter the location where the
device is installed.
(0-32 characters)
blank
Administrator Enter the administrator ’ s name.
(0-32 characters)
blank
Phone Enter the administrator ’ s contact
information.
(0-32 characters)
blank
Comments(E-mail) Enter any comments regarding
the administrator .
(0-32 characters)
blank
Security Settings
Item Details
Default Setting
New Password Enter the new password.
(0-9999999)
blank
Conrm Enter the new password again to
conrm it.
(0-9999999)
blank
On the Security settings screen, besides entering a password, you can specify other security-related
information, such as IP address-based SNMP or TCP usage restrictions, MAC address-based
access restrictions, or IPP and FTP authentication settings.
7. Click OK to activate the settings.
Network Setting 577
To Next Page
Loading...
Need help?
General
