Canon iPF650 - imagePROGRAF Color Inkjet Printer - Reducing Dust from Cutting Rolls

Handling rolls
Reducing Dust from Cutting Rolls
For media such as Backlit Film that are more likely to generate debris when cut, select CutDustReduct. > On in
the Paper Menu of the Control Panel . This option reduces debris from cutting by printing black lines at the leading
and trailing edges of documents. It may help prevent Printhead damage. Y ou can specify for CutDustReduct. to
be activated for particular types of paper .
Important
• Do not set CutDustReduct. to On for paper that wrinkles easily , such as Plain Paper or lightweight
paper . This may impair cutting and cause paper jams.
• Borderless printing is not available when CutDustReduct. is set to On . T o use borderless printing,
select CutDustReduct. > Off .
Set CutDustReduct. to On as follows.
1. On the T ab Selection screen of the Control Panel , press ◄ or ► to select the Paper tab ( ).
Note
• If the T ab Selection screen is not displayed, press the Menu button.
2. Press the OK button.
The Paper Menu is displayed.
3. Press ▲ or ▼ to select Paper Details , and then press the OK button.
4. Press ▲ or ▼ to select the type of paper loaded in the printer , and then press the OK button.
5. Press ▲ or ▼ to select CutDustReduct. , and then press the OK button.
6. Press ▲ or ▼ to select On , and then press the OK button.
134 Handling Paper