Ink T anks
3. Hold the Ink T ank by the grips and remove it. Press the OK button.
Caution
• If there is still ink in the Ink T ank you removed, store it with the ink holes (a) facing up. Otherwise, ink
may leak and cause stains. Put the Ink T ank in a plastic bag and seal it.
Note
• Dispose of used ink tanks according to local regulations.
Install the ink tanks
1. Before opening the pouch, gently agitate the Ink T ank once or twice. Agitate the ink in the Ink
T ank by slowly rotating the Ink T ank upside-down and right side up repeatedly .
Caution
• Do not remove and agitate ink tanks that have already been installed in the printer . Ink may leak out.
Important
• If you do not agitate the Ink T ank , the ink may settle, which may af fect printing quality .
Maintenance 625
To Next Page
Loading...
