Ink T anks
2. Open the pouch and remove the Ink T ank .
Caution
• Never touch the ink holes or electrical contacts. This may cause stains, damage the Ink T ank ,
and af fect printing quality .
3. Press the OK button and insert the Ink T ank into the holder facing as shown, with the ink holes
down.
Important
• Ink tanks cannot be loaded in the holder if the color or orientation is incorrect.
If the Ink T ank does not t in the holder , do not force it into the holder . Make sure the color of the
Ink T ank Lock Lever matches the color of the Ink T ank and check the orientation of the Ink T ank
before reloading it.
4. Push the Ink T ank Lock Lever closed until it clicks into place.
626 Maintenance
To Next Page
Loading...
