Adjusting the feed amount
Adjusting the feed amount
Adjusting the Feed Amount
If printed documents are af fected by the following problems, try adjusting the feed amount.
• Banding in dif ferent colors
• Line length is not accurate in the direction paper is fed
T o adjust the feed amount, do the following, in this order .
1. Depending on the issue, adjust Adj. Priority to suit the particular type of paper .
( → P .613)
2. Execute Adj. Quality or Adjust Length , depending on the selection in Adj. Priority .
( → P .614)
( → P .616)
( → P .619)
3. After executing Adj. Quality , execute Adj. Fine Feed for further adjustment as needed.
( → P .618 )
612 Adjustments for Better Print Quality
To Next Page
Loading...
