Messages regarding paper
Paper jam
Push the release lever back.
Cause Corrective Action
A paper jam occurred in the printer during printing.
1. Push the Release Lever back and remove the
jammed paper .
( → P .120)
( → P .145)
2. Load the paper .
3. Pull the Release Lever forward.
4. If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
( → P .106)
( → P .136)
Manually rewind the roll all the way and press OK.
Cause Corrective Action
A paper jam occurred when advancing the paper .
1. Rewind paper on the Roll Holder manually , all the
way , and then press the OK button.
2. Load the paper .
3. If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
( → P .106)
Error Message 697
To Next Page
Loading...
