Printer parts
Printer Parts
Printer parts
Front
a. Roll Cover
Open this cover to load rolls. ( → P .17)
b. Paper Feed Slot
When loading paper , insert it here.
c. Roll Ledge
When loading rolls, rest the Roll Holder here before loading it in the Roll Holder Slot .
d. Release Lever
When releasing the Paper Retainer , push this lever back.
e. Control Panel
Use this panel to operate the printer and check the printer status. ( → P .20)
f. Ink T ank Cover
Open this cover to replace an Ink T ank . ( → P .18)
g. Paper Alignment Line
An orange line for alignment of paper .
h. Maintenance Cartridge Cover
Open this cover to replace the Maintenance Cartridge .
i. Maintenance Cartridge
Absorbs ink used for maintenance purposes such as head cleaning. (Replace the cartridge when it
is full.)
j. Cutter Unit
A round-bladed cutter for automatic roll cutting.
k. Cutter Rail
The Cutter Unit passes over this rail to cut paper .
l. Output T ray
All printed documents are ejected from this slot.
Printer Parts 13
To Next Page
Loading...
