Handling rolls
6. Using both hands, rotate the Roll Holder toward the back to rewind the roll.
7. Holding the Roll Holder ange (a), remove the holder from the Roll Holder Slot .
Note
• For instructions on removing the Roll Holder from rolls, see “Removing the Roll Holder from Rolls”.
(→P .1 18)
8. Holding it at the positions indicated, close the Roll Cover .
Note
• T o load new paper in the printer at this point, see “Loading Rolls in the Printer”. (→P .106)
Handling Paper 1 17
To Next Page
Loading...
