Canon iPF650 - imagePROGRAF Color Inkjet Printer User Manual

Handling sheets
Load paper in the desired position to start printing from
Follow these instructions to load paper at the desired starting position for printing when W idth Detection
is Off .
1. If you did not send a print job in advance, a menu for selection of the type of paper is displayed.
Press ▲ or ▼ to select the type of paper , and then press the OK button.
Note
• If a print job was received before paper was advanced, the media type and size specied by the job
are shown on the Display Screen .
Thus, this screen is not displayed. Go to step 2.
2. W idth Detection OFF . OK to continue? is now shown on the Display Screen . Press ▲ or ▼ to
select Leave OFF , and then press the OK button.
3. After a menu for selection of the paper size is displayed, press ▲ or ▼ to select the paper
size, and then press the OK button.
4. Open the T op Cover and check the position where paper is loaded.
T o start printing from the current position, close the T op Cover .
T o reposition the paper , push the Release Lever back.
142 Handling Paper

Canon iPF650 - imagePROGRAF Color Inkjet Printer Specifications

General

Printer Type	Large Format Printer
Print Technology	Inkjet
Maximum Print Resolution	2400 x 1200 dpi
Number of Ink Colors	5
Number of Nozzles	15, 360
Ink Cartridge Capacity	130 ml
Media Thickness	0.07 - 0.8 mm
Memory	256 MB
Operating Systems	Windows, Mac OS
Print Speed (Color)	Approx. 1.5 minutes (A1)
Print Speed (Black & White)	Approx. 1.5 minutes (A1)
Ink Colors	Cyan, Magenta, Yellow, Black, Matte Black
Ink Cartridges	PFI-102
Media Size	A4, A3, A2, A1
Media Width	24 inches
Media Sizes	A1, A2, A3, A4, B1, B2, B3, B4, 24", 36", 44"
Media Types	Plain Paper, Coated Paper, Fine Art Paper
Media Handling	Roll Feed, Manual Feed
Connectivity	USB, Ethernet
Interface	USB 2.0, Ethernet
Weight	46 kg
Weight (Approx.)	46 kg