Conserving roll paper
Conserving Roll Paper by Printing Originals W ithout T op
and Bottom Margins (Mac OS X)
This topic describes how to conserve roll paper when printing originals that have a top and bottom margin,
based on the following example.
• Document: Any T ype
• Page size: A4 (210.0 × 297.0 mm [8.3 × 1 1.7 in])
• Paper: Roll paper
• Paper type: Plain Paper
• Roll paper width: A3/A4 roll (297.0 mm [1 1.7 in])
1. This sets the B Format for and C Paper Size .
Note
• The conguration method varies depending on the OS and application software you are using.
If Page Setup is displayed in the application menu, the settings are congured by opening the
Page Attributes dialog box from Page Setup .
If it is not displayed, the settings are congured in the upper part of the printer driver displayed when
you select Print from the application software menu.
2. Select the printer in the A Printer list.
3. In the F Paper Size list, click the size of the original. In this case, click ISO A4 .
4. If you congured the settings using the Page Attributes dialog box, click F OK to close the
dialog box, and then select Print from the application software menu.
310 Enhanced Printing Options
To Next Page
Loading...
