Free Layout
Changing the Object Size
Y ou can change the object size by means of mouse operation or by specifying a scaling value.
Note
• The vertical-to-horizontal ratio remains unchanged when the object is enlarged or reduced.
Resizing by means of mouse operation
1. Select an object.
2. Place the pointer at a corner of the selection box around the object to show the arrow handle,
and drag this handle to change the object size.
Resizing by specifying a scaling value
1. Select an object.
2. Open the Format Dialog Box . (→P .525)
3. Use Scaling to set the magnication for enlargement or reduction. Y ou either enter numbers
directly .
Note
• Y ou can input between 25 and 400.
• Y ou can change the numbers by clicking either “▲” button or “▼” button.
4. Click the “OK” button.
528 Mac OS X Software
To Next Page
Loading...
